 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
|
||||||||
 |
 |
 |
 |
 |
|
|||||||||
 |
 |
 |
 |
 |
|
|||||||||
 |
 The welding lathe system includes a Process Welding Systems' SCS-102 Solid State Speed Control and a DT-100 Weld Controller. The lathe has 22” between centers. Standard 6” 3 jaw chucks or 5C collets can be used with the headstock and tailstock. The 5C headstock collet closer is activated by an open/close foot switch and the tailstock open and close is activated by a hand switch. The head stock and tailstock has separate regulators with gauges and speed controls. Welding equipment is a Miller Maxstar 200LX with the PWS DT-100 Weld Controller. The TIG torch uses an electro gauge to accurately set the tungsten stand off distance before welding. Motions and actions are controlled by a PLC. The system included all wiring, hoses, cables, regulators and manuals with setup and training. Contact PWS for Custom Designed Lathes and Welding Systems. |
|
||||||||||||||||||||||||
|
Process
Welding Systems, Inc. • 72 Buchanan
St • LaVergne, TN 37086 • Ph:
615-793-7020 • Fx:
615-793-7557
|